Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning, it could be because of an unresponsive battery in the coin-cell, damaged receiver modules, water problems, or a damaged chip. Luckily these are all easy to fix, and you’ll have your car back to normal in no time at all!
Car keys can also be damaged because the key blade gets worn. This is an easy fix when you visit your local Car Key Man Auto Locksmith and let them put in the new blade for you.
Battery
The key fob inside your peugeot 206 key programming 308 may die or become weak enough to not send a clear signal. The key fob could be inoperable and prevent you from locking or unlocking your doors, or starting the engine. To fix this, you’ll have to replace the battery inside your key fob.
You’ll need a replacement battery from an auto parts store or your local hardware store. Make sure that the battery is brand new and not sitting on the counter for too long. A brand repairer new battery has more capacity and will transmit a stronger signal your vehicle.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors don’t open it’s possible that the receiver module in the car is the cause. Your local Peugeot dealer can reprogramme the receiver module.
The internal chip of the key fob can also be damaged. You can harm your key fob if you drop it on the ground or expose it to water. The rubber seals that shield the chip from moisture might be worn down over time, particularly if the key fob is exposed to water for extended periods of time, such as submerging it in the ocean at the beach. To avoid this you must keep your key fob away of water and out of water.
Water Damage
If your key fob gets soaked regardless of whether you tossed it into the pool or fumbled it into a puddle, don’t assume it’s a loss. While the key fob comes with rubber seals which should shield it from water, long-term exposure to water can cause damage to its electronic chip. Water is a good conductor, and any water that comes into the key fob will cause the short circuits to be in series which can eventually harm the electronic chip. After removing the batteries clean the contacts with isopropyl and then dry them completely before putting them back in.
A dead battery might be the reason your Peugeot 308 won’t start. If you have a spare car, jumper cables could be used to get the engine working again. If the battery has a problem the battery must be replaced.
A defective receiver in your car can also prevent it from receiving the signal from the keyfob. It could be due to a issue with the antenna, or wiring or the key fob might be damaged. It may be necessary to program a new fob into your vehicle if using one. If you are unable to solve the issue, you should contact a professional technician. A technician trained in the field will be able diagnose the problem quickly, and then fix it right away.
Radio Interference
Interference can cause symptoms like a key fob that isn’t recognized or has a restricted range. The interference could be transmitted or radiated the latter caused by speaker and power cables passing too close to electrical components. In general, rerouting cables and moving them away from these components can solve the issue.
It’s unlikely that someone is monitoring your key fob signals to take your car away, but it’s possible that your signal has been muffled by radio frequency interference. Fortunately, this issue is simple to fix.
If your key fob isn’t being recognized by the system, try replacing the battery. Make sure that the battery is of the correct size and type. If the battery is not properly sized, it could damage the fob.
These devices can interfere with the key signal, if they utilize the same radio frequency. Avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system in automobiles has a receiver which receives radio signals from the key fob. It will not be possible to start your vehicle if the receiver isn’t working even if the key fob is in good working order and is reprogrammable. The issue could be caused by a number of causes, including the dead battery in the coin and water damage. The receiver could also be faulty due to a software glitch or internal damage to the key.
One of the main reasons that your Peugeot 308 key fob doesn’t work is that the battery inside has gone out of service. It is easy to replace it by a new battery however, it’s important to select the correct battery for your key fob. It is best to use one that is the same size, voltage, and specification as the original.
Another reason your peugeot 108 replacement key cost 308 key fob might not work is because it is paired with another vehicle. You might have accidentally given your key fob to someone else or it was used to unlock other vehicles. This issue can be solved by reprogramming the key fob using an OBDII scan. The scanner will usually ask you for specific information about the vehicle, such as the VIN or engine type, so it’s essential to enter this information correctly.
