Double Glazed Window Repair
Most double glazed windows come with a guarantee, and it’s important to know the scope of this warranty. It usually covers any problems with window hardware, such as hinges and locking mechanisms within the first 10 years.
The mist that forms between the glass windows can be caused by a break in the seal, and it’s something that needs to be repaired quickly to prevent mould or damp from forming in your house.
Condensation Between the Windows
If condensation forms between the windows in your home, it is an indication that the seal securing the insulating gas between the panes has failed. This is a serious problem that must be dealt with promptly, especially in winter, when humidity levels are at their highest. It can also cause damage to the sills, sealant, and even mildew or mould.
Ideally, double-glazed windows should never experience condensation between the panes. This issue is often caused by high humidity or a very cold snap. Fortunately, this issue is fixable without replacing the entire window. A professional can drill tiny holes in the window and spray a special cleaning solution inside. The moisture is then sucked out of the window, and an anti-fogger device may be added to prevent any further buildup of moisture in the future.
Condensation in the windows could be due to air leakage or other factors outside of the window. In this scenario it could take longer for the moisture inside the window to build up since the air must be sufficiently warm to evaporate the water molecules. In these situations, it is better to replace double-glazed windows than attempt to repair the sealed units.
A double-glazed window is constructed consisting of three or two pieces of insulated glass held together by a frame made of metal. The gap between the two of the window is filled with a non-toxic insulating gas like argon or krypton, and then sealed tightly. The seal stops the insulating gases from leaving and also blocks moisture and air from getting into the gap.
As windows age, seals can deteriorate allowing moisture to leak between the glass panes. It is important to recognise when the seals are leaking, as it means that the double glazing isn’t performing as well as it used to. This could result in lower energy efficiency, a rise in heating bills, damage to the property, and the possibility of condensation between the windows.
Mist
If you see condensation on the outside of your windows, it is perfectly normal and means that your double glazing is working well and keeping the heat inside your home. The condensation happens because the outside air is hotter than the glass, and then reaches the dew point of the window prior to the air inside. Double glazing of high quality is a fantastic way to get this.
If you notice condensation on the inside of your window, this could be an indication of a ventilation issue within your home. This is because the extra moisture isn’t going anywhere and ends up on your window, in carpets, in furniture and in other places in your home. The process of having this examined by an expert and ensuring that there is plenty of fresh air flowing through the house will help to prevent it in the future.
Another reason you could get mist on your double glazed window is that the seal between the two panes has worn down. This can be caused by wear and tear or through the use of chemical cleaning products. The best option is to fix the windows as soon as you can.
Professionally repairing your windows will ensure that they are fog-free free of condensation and free of misting. This is also much cheaper than replacing your windows and you will save money on your energy bills.
A window installer registered with FENSA will provide you with a cost estimate to repair or replace your double glazed windows. Upgrade your windows to energy-efficient A-rated ones in the event that they are extremely old.
It is a good idea to keep copies of any warranties and agreements with your window fitting company. This can be extremely helpful in the event that any issues with your windows develop in the future, and you can then contact your fitters to resolve the issues. This is better than ignoring the issue, which could lead to additional problems in your home.
It is difficult to open or close
If double-glazed windows become difficult to open and close it isn’t just annoying, it can lead to higher energy bills because of heat loss and draughts. It could also be a security risk, especially when the locks aren’t functioning correctly. It is recommended to fix double-glazed windows and doors in the earliest time possible.
If you can’t open your window and have tried the most basic of solutions like using a screwdriver to prise it open or tapping around the frame using a sharp object, the issue could be more serious. The window may have shifted and needs to be re-set or there may be a gap between glass and frames. In either case you should consult a double-glazing repair expert to ensure that the repairs are completed correctly and to prevent further problems.
It’s not unusual to find upvc windows repairs near me window handles and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. This is caused by a build up of grease or dirt inside the handle. It can be solved by cleaning it with a uPVC cleaner. If this doesn’t work, try tapping the uPVC using the help of a screwdriver. Be careful not to harm the handle or window handle mechanism.
If this doesn’t solve the issue then the window will have to be replaced since the hinges might not be in the correct position or the locking mechanism could be damaged. In this instance, you must seek out a professional UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or locked shut double glass window. He has a lot of experience in converting old window mechanisms to modern. This could save you money on replacing the entire window. Call or email us today for more information or a free quote.
Warping
Double-glazed windows are usually the best option for saving energy at home. They are made up of two distinct panes with a spacer, air or a dense gas between the panes. This creates a seal to keep cold air out and warm air inside. However in time, the windows may be damaged or destroyed and require repair. Fortunately, the majority of repairs are simple and can be completed without the expense of replacing the entire window.
Warping is a frequent issue with double-glazed windows. This occurs when the windows start to bow, bend or twist, which can impact the strength of the window and its insulation capabilities. Double-glazed windows should be properly installed and maintained to avoid this issue.
If your double-glazed windows are beginning to swell, it’s essential to speak with a professional immediately to stop the situation from worsening. They can inspect your windows to pinpoint the root cause. They will then use special tools to correct the issue and make sure that your windows are completely sealed.
The most common cause of this issue is water vapour in the windows which can accumulate over time. This could be due to many factors, including weather conditions, humidity levels and temperature changes. To remedy this the expert will drill tiny holes in the window to release the moisture. Then, they will use a cleaning agent to clean the glass and then apply an adhesive to keep it dry in the future.
If your windows can’t be opened or shut it could be due to a malfunctioning mechanism or hinges. It is advisable to grease these areas of the window prior to calling a professional as this can often solve the issue and decrease the necessity for replacements. If your windows are quite old or are not providing the insulation you would like to see It is generally better to replace them.
