Protect Your Pride And Joy With The Ghost Immobiliser
Guard your precious possessions against theft with the Ghost Immobiliser. This system is discrete and doesn’t require additional key fobs in order to operate.
The device uses buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This will then authorize the startup of your vehicle.
Simple PIN Code Change Process
Many owners are upgrading their security due to the rise in vehicle theft. There are many kinds of aftermarket security devices, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking device can aid in finding your car if it is stolen, but it will not prevent the crime. Immobilisers, in contrast perform exactly as they claim on the label – they shut off your car’s engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.
The ghost device makes use of the buttons on your car to generate a unique sequence that must be entered to allow the engine to start. This can be done using the heater, window or indicator stalk buttons. In addition option, there is an app on mobile that can act as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is an excellent option when you wish to donate your car to valet parking or maintenance. The immobiliser will remain in operation.
The Ghost is a truly unique and innovative device that works in conjunction with buttons of your car instead of being a separate device. This means that it is not just a highly effective protection against theft of your vehicle, but also a transferable device over to any future cars you own, making it much more valuable than a traditional steering wheel lock.
Weatherproof small device
The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key hacking and cloning. It also stops ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique used by thieves to bypass immobilisers.
The advantage of using CAN data is that it runs silently compared to traditional systems. It isn’t detected by sophisticated RF scanning and code-grabbing technologies as well as detected by traditional diagnostic tools. The Autowatch ghost doesn’t emit LEDs, but instead utilizes the buttons on your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app only allows one connection, and comes with the ghost immobiliser installation near me‘s unique pairing code. the Ghost. All communication between the two devices is protected.
The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to run if the correct PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to transfer your vehicle to a valet service for servicing without the need to enter a PIN code.
Each vehicle is tested
The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that is able to be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a custom code. The system can be turned on and off by using your smartphone’s application without the need for wires.
The standard factory immobilisers function with a transponder which is embedded in the key. It transmits a message to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder from a different vehicle is used instead, the immobiliser won’t recognise it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by a South African company at the top of the line in vehicle security technology. It protects you from key cloning or hacking, and even key theft. The only way a thief could take your car is physically towing it away, and even then they would not be able to drive it.
Ghost utilizes the buttons of your car, such as the indicator stalk as well as the steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered before you can drive. It does this without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and doesn’t transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code grabbing technology to determine if the security system has been installed.
Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle so it can’t be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm, which requires disarming using an action sequence. This makes it a fantastic alternative to a GPS tracking device, which can be used to locate your vehicle after it’s stolen.
Emergency PIN code override
You don’t have to look far on social media to find stories or videos of vehicles that were stolen using the most advanced technology tools. This includes key-cloning and hacking devices that allow them to start your vehicle without your original key fobs.
Our Ghost immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code by pressing the buttons on your steering wheel, door panel and the centre console. The unique pin code is entered along with your original key fob to stop the engine from getting started. The unique override pin can be found on a black card that you will receive after your installation. It is easy to remember since there aren’t any LED indicators.
The device is hidden in the vehicle’s wiring and doesn’t emit any radio signals, which means it cannot be recognized by thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it a great alternative to a tracker.
In contrast to other security systems that have an engine relay bay, CANBUS Immobilisers communicate with the car’s ECU and BCM via the CAN data bus (brand dependent). This allows them to disable a vehicle completely, by sending an electronic block to the ECU and engine.
It is also possible to connect a separate analogue immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They also work with valet/service modes and an excellent alternative to a tracking device if you take your car into the dealer to address an electrical issue.
Service/Valet Mode
In recent years, there has been a increase in vehicles that are stolen without owners’ keys. It’s easier than ever to take your joy and pride thanks to the availability of key cloning tools & door lock picks. We have developed the Autowatch ghost immobiliser problems (te.Legra.Ph) Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been copied.
It communicates directly to your vehicle’s ECU (Engine Control Unit) via the CAN data circuit. It’s completely silent since it doesn’t utilize radio frequencies or key fobs. This means it isn’t detected by diagnostics or other vehicle hacking devices. It also prevents the addition of an additional key or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.
The device is hidden inside your vehicle and is accessible via buttons on your steering wheel, the centre console and door panels. Before you can start your vehicle, you must enter a unique, changeable PIN number that is up to 20 numbers.
This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car being started or driven away without a PIN code being entered first. If you’re driving away with the device in motion the indicator will flash on your dashboard which will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run just as normal. If you do not enter your PIN code at this point, the indicator will continue to flash and require another PIN code for every attempt to start your car.
