How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback that features distinctive engine configuration. It’s quite noisy but still a blast to drive.
The key fob battery in your nissan juke needs to be replaced every two years or so, or if it’s low. You can do it yourself, but you’ll need a few tools.
Dead Coin Battery
If your Nissan Juke key fob isn’t working the first thing you need to examine is the battery within it. It could be dead and require to be replaced. This is a straightforward fix that will take only some minutes. It’s as easy as flipping the fob upside down and removing the tiny latch/release on the back. Remove the battery from the old one and then put in a new one, making sure it’s facing downwards in the fob and line between the two halves of the fob carefully.
If the fob was exposed to water, it needs to be cleaned before putting the new battery into. It is possible to clean the fob using isopropyl or electronic cleaner, and paper towels. Then, let it dry completely prior to reinstalling the battery.
The key fob has to be connected with the car in order to start it. This can be done by following the instructions in the owner’s manual, or an OBDII scanner. If the key fob is not been linked, it is most likely the reason of the reason it stopped working. A malfunctioning chip inside the fob could cause it to stop working however, this is a rare. A new receiver module could be needed in this case. If this is the scenario, the module will need to be replaced by an accredited technician.
Water Damage
A key fob is battery operated, and these batteries must be replaced every two years or every first sign of your car not responding when you hit the “start” button. Keys come with rubber seals that keep water out, however submerging the key fob in a pool or ocean water can damage the electronic chip inside. If this happens, you will need to buy a replacement key from Nissan or an automotive locksmith.
If the key fob has an operating chip, it’s likely that the computer has lost connection to it, which can happen for any number of reasons. A simple restart of the vehicle will resolve this issue, but in the event that the key is displaying the “Key ID” error message, you’ll need contact Nissan or an auto locksmith to get help.
The three most common reasons for this problem are dead key fob batteries, a non-programmed key, and a damaged or defective key fob. The first two issues are easy to fix, and the latter is a bit more difficult to identify and repair on the spot, but it can usually be fixed with a bit of patience. WhoCanFixMyCar allows you to compare Nissan Key Replacement prices in your local area and book your repair. It takes just a few seconds, and you can even review customer reviews from local garages, Nissan car mechanics and dealerships before you decide.
Faulty Chip
The key fob inside your Nissan Juke has a special chip that transmits an electronic signal to the car when you turn it. The key could stop working because the chip is malfunctioning. If this happens it is possible to fix the problem by replacing the key. There are many reasons your nissan key code location Juke’s key may be faulty, including water damage or a dead battery for your coin or a damaged receiver module.
If your key fob stopped working after washing it or even a bath, it is important to examine the chip for damage from water. Make sure the metal retainers are in good shape and the chip isn’t exposed to water. If you notice any signs of water damage on the electronic component, remove the battery and wipe it down using isopropyl ethanol or an electronic cleaner.
If the chip is defective, you’ll need to contact your local locksmith or dealer. They will require the year, make, and model of your vehicle in order to locate an alternative. Also, you will need to write down your VIN (Vehicle ID Number) to ensure that the dealer or locksmith will know the key you have. This will enable them to locate the correct key code, and also ensure that they are cutting the correct one.
Faulty Receiver Module
The key fob sends an audio frequency signal to your car, enabling it to perform a number of functions. It can unlock the trunk as you hurry to the car with groceries or start your car by pressing the button on the fob. It can also open your windows and switch on the horn in case you have a mishap and lock your keys inside the car.
If the key fob stops functioning, there could be a problem with the receiver module in the vehicle. The receiver modules are tuned to receive specific frequencies that match the signals generated by the nissan juke key fob programming key fob. If your car has an inoperable receiver module is damaged, it will cease to respond to any signal coming from the key fob.
Whatever the way your Nissan key fob gets damaged, it’s recommended to have a spare in case the key is lost or broken. A locksmith or dealership can program the spare key to work with your Nissan. This will help you avoid the hassle of losing your keys or locking them inside your car.
If your Nissan Juke key fob is exposed to clean tap water or rain the issue can be solved by cleaning it using isopropyl alcohol or electronic cleaner. If, however, the chip has deteriorated then you’ll need to buy a new key fob that can be coded to your car by a locksmith or dealer.
