Why Does My Rolls Royce Phantom Key Fob Not Work?
The Rolls-Royce Phantom conveys wealth and prestige. Its large waterfall-style grille and the classic upright dimensions are instantly recognizable. It is one of the most expensive automobiles around the globe.
The rolls royce key fob may stop working due to many reasons. A dead coin battery is the most common cause, but other reasons are water damage or receiver modules.
Battery
The most common reason for a rolls royce remote key-Royce Phantom key fob not functioning is the dead coin battery within. It is essential to remember that the key fob can also stop working due to other reasons, like damaged buttons or water damage. Other reasons include signal interference, bad battery contacts, and unpaired keys which require reprogramming. If your key fob stops functioning, you may want to talk to a locksmith. A locksmith can quickly diagnose the issue and offer an immediate solution.
To ensure that the battery remains functioning, it must be protected from dirt and moisture. It is therefore recommended that you purchase an waterproof case for your key fob whenever driving. It is also advisable to remove battery from key fob prior cleaning or washing it. Furthermore, the chip inside the key fob is extremely sensitive to water and should not be exposed to soapy or salty water. If the key fob is vulnerable to exposure to water, use isopropyl ethanol or an electronic cleaner to protect against water damage.
The battery pack of the Phantom EE is a unique power system with several innovations. This sets it apart from other luxury vehicles powered by traditional power systems. A “power reserve dial” for instance, has been added to dashboard to inform the driver of the vehicle’s current power state. This is a brand new design element that is intended to challenge the established models of car design and highlight the potential of alternative drivetrain technologies.
One of the main advantages of this electric powertrain is the ability recharge to occur without any physical connection between the car and its charging station. This is achieved through induction. Induction involves the transference of power over two surfaces which include an induction mat placed on the ground, and a power transfer unit that is located under the battery pack.
The process of recharging takes place in two stages, and has a a capacity of 13.5kW per phase and an overall charge capacity of 71kWh. This makes it the largest passenger car battery in the world. Additionally, the Phantom EE is fitted with three different chargers that permit single-phase and three-phase charging as well as regenerative braking.
Contacts
If your Rolls Royce Phantom remote key fob has stopped working, the problem could be due to the battery being dead or worn buttons. Fortunately, this issue is usually easy to fix. You can also try reprogramming the key fob or replacing the 12 volt battery. If the issue persists, the receiver module could be defective. The receiver module is used by the remote keyless system to communicate with other electronic components onboard via radio signals. If the receiver module is damaged, it will stop to communicate with the key fob or other onboard electronics.
If you are having issues with your key fob ensure that the battery contacts are clean and dry. The metal clips that hold the button-cell battery in place and complete the circuit can be damaged by wet or dirty hands. Replace the battery with a newer version of the same dimensions and voltage. If you replace the battery, make sure to clean the contact surfaces with ruby alcohol or electronic cleaner before rebuilding the key fob.
The key fob of the Rolls Royce Phantom has an electronic chip that transmits signals to a remote keyless system module. The module then converts these signals into commands the car is able to understand and then act upon. This is how the car will know that you need to open doors or retract the “flying woman” hood ornament in the grille.
If the key fob has been exposed to water, immediately remove it from the vehicle and rinse the electronic chip using isopropyl alcohol or an electronic cleaner. If you do not then, the chip could be damaged.
Water damage
The key fob comes with rubber seals to protect the electronic chip from getting exposed. This makes it impervious to splashes and light rain but not the kind of deep immersion that could happen if you drop your key in the midst of a puddle, or when you submerge it in the ocean. If the fob gets wet the chip might be fried. You will need to replace it.
You can still save your roll royce key fob even if it has been affected by a dog’s urine, washing machine, or soapy handwashing. You can save money by following simple steps.
First, you should take the key fob apart and dry it thoroughly. Remove the battery when you can, and make use of compressed air to blow any excess water out of the key fob. After you’ve done this, let it dry out for a few days and try using it again.
If your key fob is prone to get wet, consider buying an waterproof case to shield it from damage. It’s also recommended to keep an extra key in your pocket so that you don’t have to wait for the fob to dry out.
Your Rolls Royce Phantom remote key could stop working in certain situations due to interference or the battery is dead. This problem is often caused by objects, poor weather conditions, or transmitters that operate on the same frequency your remote.
Keep your key fob far away from these sources. If you are unable to avoid these sources of interference, you could try shifting your car to a different location or reprogramming your remote. If you’re still unable to fix the issue, it’s recommended to seek out an expert technician. They can diagnose the issue and determine if the issue is an electrical or mechanical issue.
Reprogramming
The key fob in your Rolls Royce Phantom is an important component of your vehicle’s security system. It sends commands to the receiver module, which then transmits them to the vehicle’s central locking mechanism. If the key fob fails to work, it can be a costly and frustrating issue. There are a few simple things you can try to get your key fob to work again.
The first thing to determine is whether the coin battery inside the key fob is depleted. It is a common reason for Phantom key fobs not locking or unlocking and usually signs of deterioration such as the ability to lock or unlock is reduced. Replace the battery with a new one with the same size, voltage and specifications. Also, ensure that the metal retaining clips that hold the battery in place aren’t loose.
Another possible cause is water damage. The key fob is equipped with rubber seals that prevent water from getting to the chip inside. However, when it is immersed in salty or soapy water, the seals may be damaged. If this happens, you must remove the battery from the fob and clean it using isopropyl or an electronic cleaner. Then, dry it thoroughly before putting it back into the fob.
If the key fob doesn’t work, it could be an indication that the receiver module has been faulty. Connecting a diagnostic scanner under the dashboard of the Phantom to the OBD port is the most effective way to diagnose the problem. The scanner will then request to provide certain details about your car, including the year, model, and engine type. You’ll also need to enter the code for your key of rolls royce fob.
Another possibility is signal interference. This can be caused either by weather conditions, objects or transmitters operating at the same frequency. The remote control will still function when you’re near the Phantom however it will not lock or unlock from an extended distance. You can resolve this issue by removing any objects that could be blocking the signal, or moving the Phantom away from the transmitters.
