Peugeot 208 Key Replacement
Peugeot 208 key replacement is best left to auto locksmiths with experience who have the proper tools and know-how. They can program and create keys quicker and more efficiently than dealers.
A dead coin battery is most likely to blame if your key fob stops locking or unlocking doors. There are other causes for the key to be malfunctioning.
Dead Coin Battery
A dead battery can stop your Peugeot 208 from locking and unlocking, and also stopping it from starting the engine. If this is the case, you’ll need to apply the backup starting technique that is described in your vehicle’s owner manual.
Another reason why the 208 won’t start is that the spark plugs are been damaged. Spark plugs are what ignite the fuel to start the engine. They have a limited life span. They’ll eventually fail when they aren’t used enough.
There is a simple solution for this issue. The best option is to check the voltage of your car battery using a multimeter. If the voltage is below 11,5 volts then it’s time to replace it. It is also essential to clean the contacts of the battery in the event that it is damaged by corrosion. This can be accomplished by removing the rubber covers off the two battery terminals and then using a wirebrush to clean any parts of the battery that are corroded. Then, reconnect the cables that connect the positive and negative poles.
Water Damage
If your 208 won’t start and the battery hasn’t failed, you should examine the spark plugs. You might find that they are filthy and don’t spark. This can be fixed by cleaning the spark plugs in a workshop.
Peugeot cars have keys that are transponder-type and is compatible with the car’s immobiliser system. This ensures that only the right key can turn the engine. If the chip inside the Peugeot key is damaged, it will not send the proper signal to the vehicle.
This is a very common issue that can be caused by water damage. This is most common in colder climates. the vehicle might have been exposed to rain or snow. If this is the case, contact a reputable auto locksmith who will have all the tools and equipment needed to modify the new key. They will also have the latest technological know-how and the equipment required to make a Peugeot 208 smart key. The process shouldn’t take longer than 15 minutes.
Contacts to the battery are not working properly.
Peugeot changed from the carbon-encased transponder chips and introduced a new type of chip that incorporates electronic components in a circuit board. The new system is great when it’s new, however the circuit boards degrade over time and stop working properly.
This could stop the immobiliser chip from triggering and causing your car to not start. If this happens it’s best to contact a Peugeot specialist or locksmith.
Another issue that is common is when the key fob battery gets depleted, which causes the key blade to stop from entering the lock. A locksmith for cars can replace the battery and cut a fresh blade for you, it’s normally a quick fix.
Faulty Receiver Module
It could be that the receiver module is malfunctioning in the event that your Peugeot key fob isn’t working after being dropped on the floor, exposed to a sudden storm or accidentally washed. The receiver module is responsible for transmitting radio frequencies to the onboard computer which controls the central locking system of your Peugeot vehicle.
The key fob itself is fitted with rubber seals that prevent water from reaching the electronic chip inside. Water can damage the chip in the event that it is exposed water for a long period of. Submerging the key fob into ocean water on the beach or throwing it into the pool can be especially damaging because of the high salt content.
The module must be replaced if the peugeot 206 key fob replacement spare key is no longer working. This should be done by a Peugeot specialist or a professional auto locksmith. In contrast to other vehicles, Peugeot keys are protected by an unique immobilizer system that requires the correct code to begin the engine. This is why you should only go with a knowledgeable Peugeot locksmith to take on the job of programming and creating a replacement.
Computer with a problem on board
The on-board computer inside your peugeot partner van key is responsible for a variety of the systems in your Car Key Cover Peugeot, ranging from airbags to power windows. The on-board computer will show a code when something goes wrong. This code is stored inside the system and will remain there until the problem is resolved. This will often require the on-board computers to be replaced.
One of the most common causes of the light turning on is the loose or corroded connection in the airbag sensor. This can be caused by wear and tear, aging or exposure to salt and moisture. It is imperative to have this issue addressed as soon as possible, since an airbag that is malfunctioning can be dangerous in the event of an accident.
If your Peugeot is showing a card that is not being detected error, the battery inside the key fob might be dead or weak. This can prevent the key fob from sending a signal to disable your vehicle’s immobilizer. Try this by pressing the unlock key on the fob’s key, then trying to start your vehicle. If it doesn’t work then the battery in the key fob must be replaced.
