How to Repair a uPVC Window Frame
uPVC windows can last for a long time. Over time, they can be damaged.
The damage could affect the performance of the window. Fortunately, many of these issues can be addressed. This can save you money on new windows and increase the comfort of your home. The most frequent issues are:
Cracks
uPVC is a popular material for window frames because it’s durable and energy efficient, but it is susceptible to cracking over time. A window that is cracked is more than an eyesore. It could also let cold air into your home and increase electric bills due to heat escaping through the crack. It is possible to repair a uPVC frame without spending a lot of money and it’s possible to do it relatively quickly.
Identifying the cause of a crack is the first step. This crack could be caused by a sudden change in pressure whenever you shut or open the window. This type of crack is called a ‘pressure crack’ and is usually found on the edges of the window. It is essential to fix the crack as soon you notice it because it could cause water leakage and drafts.
A window frame that is not aligned properly is a common cause of a crack on your uPVC windows. This could be due to moving furniture, settling into a new property or even weather conditions like freezing temperatures. It is easy to fix this issue by drilling pilot holes, and then applying a silicone line across the gap. This will stop any moisture from entering the window.
Clean your uPVC windows regularly to ensure they look good and working efficiently. This includes wiping down the frames using white cloth that has been submerged in soapy or solvent water. Pay special attention to the corners where dirt can build up. It is also recommended to make use of a scraper Stanley knife to remove any beading that is stuck to the frame.
It’s also recommended to grease the rollers and hinges of your uPVC windows to ensure that they don’t begin to rattle when you open or close them. WD-40 is a good oil that is available in most hardware stores. It’s important to make sure that you clean the WD-40 off afterwards, though as it can cause a stain on the surface of your uPVC window.
Draughts
Draughts are among the most common issues that people face. These gaps in the window let cold air in and cause more expensive heating bills and a decrease in comfort. Window seals made of uPVC are usually efficient, but they could be damaged or deteriorate as time passes. If you notice an opening in your window, it’s easy to fix this by using self-adhesive foam, or replacing the seal completely.
It’s important to maintain uPVC windows clean and maintained to ensure that they last as long as they can. To get rid of dirt, wipe them clean with a soaked soft cloth. Avoid using a cloth that contains dyes because they can ruin the window frame. Also, make sure you don’t clean your uPVC windows in direct sunlight or they’ll be left with a streaky finish.
If hinges are brittle or move slowly, you can lubricate them to prevent them from misaligning. This can help keep the window open and closing smoothly and prevent any draughts. Lubricants can be purchased at DIY stores, such as B&Q or online. Be cautious not to use too much lubricant, as this could cause the hinges to become loose.
Another reason for a drafty window is that the window may not be aligned properly with the frame. This could be due to an improperly installed window or by the natural movement of the window over time. You can determine if this is the case by opening and closing the window, and observing any gaps around the corners. If you notice gaps, it is recommended to replace the window as quickly as possible in order to prevent further damage.
There are a myriad of reasons that uPVC is so popular with homeowners and businesses. They are cost-effective, safe and offer great insulation. They can enhance the value of your home and are a great investment. uPVC can be damaged and it is crucial to know how to repair them.
Loose or broken hinges
The most common cause of window problems with Upvc is the loose or broken hinges. It is possible to fix this by replacing the hinges, which will resolve the issue and allow you to open and close your windows as usual. This is a cost-effective simple, quick, and easy repair that will save you money on new windows.
Our upvc windows are fitted with traditional friction hinges. They are usually used for side-hung windows however, they can also be used on top-hung windows. These are available as a pair in either a 17mm or 13mm stack. If there are gaps in the sash or when the sash is hard to open, they are generally replaced.
It is essential to read the directions and follow the opening direction when installing a new upvc hinge. An arrow is visible on the hinge. For the window to function properly, the arrow must point in the direction of opening. Contact us if are unsure which type of hinges to order. We’ll be delighted to provide you with guidance.
It is important to lubricate your window hinges regularly. It will let the sash slide open and close without difficulty and will prevent cracking or warping of the upvc windows. You can use a light engineering oil with corrosion inhibitors to grease the hinges of your window made of upvc. This is recommended to be done at least every two years.
This is a great way to maintain and keep your window in good repair. It is also crucial to make sure whether the hinges are loose or broken. Small adjustments to the screws could fix this and you should not have any further problems with your window made of upvc.
It is a simple repair however, you might need to spend some time finding the right screw size. It is important to remember that the screws can become loose if they aren’t used regularly, so they must be checked and tightened every year.
Physical Damage
While uPVC windows are durable and long-lasting, they require some care. Regular maintenance can prevent problems like water leaks and draughts. It also helps to improve comfort and energy efficiency in the home. For this kind of work, it is recommended that a licensed firm be employed, as they have the equipment and knowledge to do the job right. Utilize the TrustATrader site to locate a local glazier or ask your friends and family members for recommendations.
One of the most common indicators that your uPVC windows need repair is cracks. It is usually caused by changes in pressure and is often visible. These cracks are usually located along the edges of the window. It is essential to repair a damaged window as quickly as possible to prevent further damage and to extend the life span of your window.
Another issue could arise if the window sash is loose. This can cause a gap between the window frame and glass, allowing cold air into your home, while warm air escapes. This issue can be caused by many ways that include children’s play or harsh weather conditions. If you notice that your sash is loose, you should seek out an expert to address the issue immediately.
Upvc window repair hinges can generate lots of noise, especially if they’re not properly maintained. It is essential to ensure that the hinges are in good condition by lubricating them with a suitable product, like WD-40. This will stop the squeaking and will make your uPVC window more quiet. It’s also a good idea to include regular cleaning of the uPVC track and wheels in your maintenance schedule.
When deciding which business to hire for your uPVC window repairs, it is important to select one with a good reputation and is insured and licensed. You should also look for an accredited glazier who is experienced in working on uPVC frames and has the right tools to perform the job. It is also a good idea to get estimates from a variety of companies, and then compare them to determine the most affordable price.
